top of page

Water monitoring: TSS concentration

OTE-TSSC

OTE-TSSC-001

TSS concentration: 0 - 2 g/L (Sumersible sensor)

TSS sensor for placement in open water, (urban) sewers, overflows, influent or other challenging environments.
Pre-calibrated modbus-sensor.

TSS concentration: 0 - 2 g/L (Sumersible sensor)

More information about this product

Key Features

Measurement Principle:

Ultrasound backscattering


Measuring Range: 0 - 10 g/L, 0 - 4g/L, 0 - 6 g/L


Independence/insensitive:

No impact of changes in optical parameters

No impact of changes of fluid colour and fluid velocity



Advantages

  1. The ultrasound OLPAS Technology provides a robust measurement that is not prone to changing water colour or other optical changes that are not relevant for the actual TSS

  2. Olpas sensors measure through fouling, requiring

  3.  much less maintenance

  4. and no need for automated mechanical cleaning (no wipers, no pressured air)

  5. Due to the longer maintenance window, Olpas sensors can be installed on hard to reach locations (eg. in sewers), while still providing an economical measurement

All publicly available products

OBO-IWAA-001
Dry Solids (%DS) measurement in Iron water / Iron sludge
OBO-MLSA-001
MLSS / (activated) sludge concentration (Chain mounting)
OTD-MLSA-004
MLSS / (Activated) sludge concentration
OTD-SDPB-001
TSS in dewatering centrate/filtrate (with centrate pump and flowcell)
OTD-SDPC-001
Residual polymers in dewatering centrate/filtrate (with centrate pump and flowcell)
OTD-SDWC-00X
Polymer concentration in centrate
OTD-SDWD-00X
Dry Solids in Sludge Cake: 0 - 40% DS
OTD-SDWE-001
Dry Solids in Sludge Cake: 0 - 40% DS (Sample grabber)
OTD-SDXC-00X
Polymer concentration in centrate (extended hot-tap transducer)
OTD-TSSA-001
TSS concentration: 0 - 100 mg/L
OTD-TSSA-002
TSS concentration: 0 - 500 mg/L
OTD-TSSA-003
TSS concentration: 0 - 1.000 mg/L
OTD-TSSA-004
TSS concentration: 0 - 10.000 mg/L
OTE-SEDA-001
Suspended Sediment Concentration (SSC) 0 - 50 g/L (Chain mounting)
OTE-TSSC-001
TSS concentration: 0 - 2 g/L (Sumersible sensor)
OTE-TSSC-002
TSS concentration: 0 - 4 g/L (Sumersible sensor)
OTE-TSSC-003
TSS concentration: 0 - 6 g/L (Sumersible sensor)
OTU-IWAA-001
Dry Solids Measurement in Iron Slude / Iron Water (Inline)
OTU-MLSA-001
MLSS / (activated) sludge concentration (Inline) : 0 - 20 g/L
OTU-SDXA-001
Sludge Concentration (inline mounting, hot tap transducer)
OTU-SDXB-001
TSS in dewatering centrate (Inline mounting)
OTU-SDXC-001
Polymer concentration in centrate (extended hot-tap transducer without screen and butons)
OTU-SDXD-001
Sludge Cake Concentration (inline mounting, SS316 transducer)
OTU-SEDA-001
Suspended Sediment Concentration (SSC) 0 - 50 g/L (Inline)
OTU-TSSB-001
TSS concentration (Inline mounting)

Didn't find what you're looking for ? 
With our versatile OLPAS Technology, we can build a tailor made sensor optimised for your application. 

bottom of page