top of page

Polymer (PE) and coagulant concentration

Polymers are often used in wastewater treatment processes to enhance removal of suspended solids and other contaminants.

For an optimnal dewatering process, it is key to have full knowledge of the PE concentration that is added to the process or that is still present.

Olpas PCM (Polymer Concentration Measurement) sensors are specifically designed for measuring concentrations of PE/Polymer flocculant in multiple doses for monitoring of the PE dissolution processes (from powder) as well as inline and online measurement of PE emulsion, PE dilution, and activation. Also for measuring residual PE in dewatering (in centrate or filtrate and other reject water); and for measurign very low doses of Polymers in effluent before the water goes into natural waters or towards another step in the

Polymer (PE) and coagulant concentration

Challenges caused by polymers


Even though polymers play a crucial role in enhancing the efficiency of wastewater treatment processes, usage in treatment-processes also introduces challenges and issues:

  • Overdosing, which can result in the formation of larger, denser flocs that are difficult to settle or filter effectively

  • Foaming, which can interfere with clarifiers and filters

  • Economic reasons, caused by the high cost of polymers

  • Concerns for downstream processes, where the polymers have a negative impact on the process

  • Environmental concerns when polymers are released into nature


Monitoring polymers to mitigate issues


To mitigate potential problems, it's crucial to carefully monitor and control the dosage of polymers for the specific wastewater characteristics, and optimize the treatment process to minimize any adverse effects.

Regular testing, process optimization, and adherence to environmental regulations can help in managing these challenges.


Olpas has sensors available to monitor the watertreatment process, and sensors for monitoring residual polymers during different stages of the dewatering process, both in high concentration or low concentrations.


Available Products

Filter by Fields (Filter)
Filter by Applications (Filter)
Filter by Mounting

Number of selected Products: 

1

Polymer Concentration Measurement (PCM) (High concentrations, Inline)
OTU-PCMA

Polymer Concentration Measurement (PCM) (High concentrations, Inline)

Measuring high concentrations of PE/Polymer flocculant in the PE dissolution process (from powder), PE emulsion, PE dilution and activation.  Easy installation and maintenance with Hot-Tap retractable.

Wastewater

Wastewater

Olpas sensors for water treatment are especially used for challenging measurement: high loads (ex. influent or activated sludge), with exceptional drift resistance and longer maintenance windows.

Industrial Water

Industrial Water

In industrial processes, inline ultrasound TSS measurements ensure precise control of slurry and wastewater. The unparrallled fouling resistance and the hot-tap mounting support boost efficiency.

Sludge Dewatering

Sludge Dewatering

We provide sensors for a complete insight into your sludge dewatering process by measuring sludge concentration, monitoring filtrate/centrate quality (TSS and residual polymers) and Dry Solids (%DS) in dry cake.

Related fields

We help unlock value within your field 

Articles & blogposts about Polymer (PE) and coagulant concentration

bottom of page