Dry Solids (%DS) Measurement in Iron water (modbus & low-power version)
OBO-IWAA
OBO-IWAA-001
Dry Solids Measurement in Iron Sludge / Iron Water - Custom (Tentacle version)
Sensor optimised for measurement in Iron Sludge / Iron Water.
For placement in a bassin or use the alternative sensor for inline measurements.
Pre-calibrated modbus-sensor.
[ Please note the DS Measurement in Iron Sludge is currenly in TRL7 ]
Measurement
Dry Solids / Dry Matter sensor for Iron Sludge / Iron Water.
[ Please note the DS Measurement in Iron Sludge is currenly in TRL7 ]
Advantages compared to optical sensors
Not sensitive to changes in fluid colour
Not sensitive to solids form and structure
Advantages compared to microwave sensors
No impact from iron in water on measurement
No need for recalibration every 7 days
The Olpas Tentacle sensor can be place both in the bassin or inline.
Installation
Requirements
1 sensor (both submitter and receiver) in direct contact with fluid.
Fluid volume of +/- 60mm depth needed for measurement (width max 20mm).
Mounting options
Inline mounting: flange, mounting adaptor, vertical or horizontal
Mounting in bassin: free hanging or in a guiding tube
Also available with exteneded transducer for inline installation with Hot-Tap retractable
